Comp cams 268H

Intmdtr · 06-13-2011

I just purchased a set of comp cams 268H cams for my 96 GT 2V.

Anyone running these and have anything good or bad to say about them.

I am also wondering if I need to upgrade the springs or if I can run them with stock springs, i am going to install them with a Ford Anderson Cam sprocket retaining tool so I hope i shouldn't need to degree them, or have any PTV issues. Bought them from a local forum and the fella has them in his 96 now with no issues.....

einehund · 06-13-2011

i'm pretty sure they are the NSR "no springs required", i don't think you need springs until you go to the 274 cams.

jsam · 06-13-2011

iirc the 268's require springs. i had them in my 97 and did have ptv on the intake side at high rpms. it was fine at idle and when i beat on it well you know what happened. mine where not degreed. i was runing stock timing. i would highly suggest degreeing them

i used the comp beehive springs

06-13-2011	#1 (permalink)
Intmdtr Leader of Men Real Name: Brian Join Date: May 2007 Location: Wasaga Beach, Ontario Posts: 9,553 iTrader: (1) Friends: (34) Last Online: 11-10-2024 05:03 PM Time Spent Online: 2 Weeks 5 Days 23 Hours 11 Minutes 58 Seconds My Album's: Intmdtr's album My Garage: Intmdtr's Garage Thanks: 0 Thanked 28 Times in 27 Posts	Comp cams 268H I just purchased a set of comp cams 268H cams for my 96 GT 2V. Anyone running these and have anything good or bad to say about them. I am also wondering if I need to upgrade the springs or if I can run them with stock springs, i am going to install them with a Ford Anderson Cam sprocket retaining tool so I hope i shouldn't need to degree them, or have any PTV issues. Bought them from a local forum and the fella has them in his 96 now with no issues..... __________________ HELLO My Name is BRIAN "Without Warning, Without Conscience" *"Live life to the fullest, it's not a dress rehearsal"*

06-13-2011	#2 (permalink)
einehund Finally Back Home!! Real Name: Max Join Date: Mar 2007 Location: Stuttgart, Germany Posts: 4,764 iTrader: (0) Friends: (11) Last Online: 06-21-2013 03:05 PM Time Spent Online: 1 Week 2 Days 22 Hours 47 Minutes 45 Seconds My Album's: einehund's album My Garage: einehund's Garage Thanks: 0 Thanked 6 Times in 6 Posts	Re: Comp cams 268H i'm pretty sure they are the NSR "no springs required", i don't think you need springs until you go to the 274 cams. __________________ 2002 Mustang GT sold 2010 GT500!!

06-13-2011	#3 (permalink)
jsam 2v hater Real Name: jonathan Join Date: Jan 2007 Location: frankiln ky Posts: 1,079 iTrader: (0) Friends: (3) Last Online: 11-17-2013 06:04 PM Time Spent Online: 3 Days 4 Hours 47 Minutes 53 Seconds My Album's: jsam's album My Garage: jsam's Garage Thanks: 0 Thanked 1 Time in 1 Post	Re: Comp cams 268H iirc the 268's require springs. i had them in my 97 and did have ptv on the intake side at high rpms. it was fine at idle and when i beat on it well you know what happened. mine where not degreed. i was runing stock timing. i would highly suggest degreeing them i used the comp beehive springs __________________ 85 gt 347 stroker. pa aod. it's a f'n money pit 79 cobra 302 4 spd 36k original miles 68 coupe, 93 calypso hatch www.bowlinggreenmustangs.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Comp cams...got them in	Intmdtr	BS Room	7	04-01-2012 08:20 PM
MysticCobra Custom Comp Cams Build First VID	BoostedMysticCobra	Other Video's	8	03-14-2009 09:18 AM
Comp Cams upper box?	91stang308	5.0 Mustang	9	11-28-2008 08:27 PM
Mystic Cobras Custom Comp Cams and Build	BoostedMysticCobra	Mustang Pics	6	11-07-2008 06:07 AM
Comp Cams Cam Quest	Cobra Vic	BS Room	2	01-27-2008 05:13 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)