A Place to share pic's and conversations about your ongoing project/s. " />
View Single Post
Old 05-06-2010   #28 (permalink)
J&SPolishing
Junior Member
Real Name: Jim
 
J&SPolishing's Avatar
 
Join Date: Oct 2006
Posts: 401
iTrader: (0)
Friends: (3)
 

Last Online:
12-20-2016 02:47 PM
Time Spent Online: 3 Days 7 Hours 22 Minutes 29 Seconds
Thanks: 0
Thanked 3 Times in 3 Posts
Re: Becca's '03 Mustang Build

Quote:
Originally Posted by ModularSpeed View Post
Jim, if you need any advice just shoot me a PM.

As far as the build, are you looking for the car to run really good, or just sound good and "enough" for a young lady? Just wondering.

If you want a few tips to make it run a little better, hit me up bud.

Just for starters. Replace the intake cams with the 96-98 Cobra cams, and put a 96-98 Cobra intake on it. that will make a world of difference. And if you are running a 28" tire, dont go with a gear numerically lower then a 4.56.

If you do those, the car wont get beat by stock GT's.
Thanks Kelly. I had planned on talking to you as soon as we start on the motor. It will be a few months until we start on the motor. I plan on swapping the B heads for 03/04 Cobra heads with a good port. Since we live and race up here in the thin air, and I need a good crank, might as well add a little stroke to the program. Once i get closer to the motor, we will talk, this is a budget deal and i spend money when I have a little left over.
J&SPolishing is offline Submit to Clesto

Submit to Digg Submit to Reddit Submit to Furl Submit to Del.icio.us Submit to Jeqq Submit to Spurl  
Reply With Quote