Need help with rear brake drums - Page 2

riverhead55 · 02-14-2010

The price at Napa for these drums are $114.00 each, I never new 74 Maviricks were that rare (joke -ha- ha ) will let you know Monday night if they fit-Al

silvergt · 02-14-2010

if you still have trouble monday, you could always go to a local machine shop and have them bore out the center hole to fit you axles

riverhead55 · 02-16-2010

Well Napa here in Springhill Florida came thru for me , part# 440-1486 was the right brake drum for my 8in. rear. The center bore is 6.1mm or 2 3/4ins. It fits great, already washed down with brake clean and will be painted tomorrow.Just to let you know they only have 1 more left in the entire country, its in California, -----thanks to all the guys who tried to help-Al

-------- added 2 Minutes and 31 Seconds later --------

Sorry for the error in the post -Al

02-14-2010	#11 (permalink)
riverhead55 Junior Member Join Date: Dec 2006 Posts: 6 iTrader: (0) Friends: (0) Last Online: 02-01-2011 07:24 PM Time Spent Online: 1 Hour 39 Minutes 54 Seconds My Album's: riverhead55's album Thanks: 0 Thanked 0 Times in 0 Posts	Re: Need help with rear brake drums The price at Napa for these drums are $114.00 each, I never new 74 Maviricks were that rare (joke -ha- ha ) will let you know Monday night if they fit-Al

02-14-2010	#12 (permalink)
silvergt stangbanger Join Date: May 2007 Posts: 1,142 iTrader: (1) Friends: (8) Last Online: 03-29-2011 07:09 PM Time Spent Online: 4 Days 8 Hours 17 Minutes 39 Seconds My Album's: silvergt's album Thanks: 0 Thanked 12 Times in 12 Posts	Re: Need help with rear brake drums if you still have trouble monday, you could always go to a local machine shop and have them bore out the center hole to fit you axles __________________ speed parts:4.10s, jlt cold air, accufab 75mm tb and plenum, moto blue udp's, MHS stage 2 cams, kooks lt's and catted x , jegs catback, steeda tri-ax, steeda stage 1 clutch, steeda clutch adj. kit, frpp alum. ds, custom tuned by VMP tuning chassis parts: steeda sfc's, steeda dbl adj uca's, lakewood lift bars, eibach springs, kyb shocks and stuts cosmetic: mach 1 grille and chin spoiler, bullitt wheels and fuel door, 20% tint, spoiler delete best e.t : 13.84@99.77 w/2.004 60' (pre-cams)

02-16-2010	#13 (permalink)
riverhead55 Junior Member Join Date: Dec 2006 Posts: 6 iTrader: (0) Friends: (0) Last Online: 02-01-2011 07:24 PM Time Spent Online: 1 Hour 39 Minutes 54 Seconds My Album's: riverhead55's album Thanks: 0 Thanked 0 Times in 0 Posts	Re: Need help with rear brake drums Well Napa here in Springhill Florida came thru for me , part# 440-1486 was the right brake drum for my 8in. rear. The center bore is 6.1mm or 2 3/4ins. It fits great, already washed down with brake clean and will be painted tomorrow.Just to let you know they only have 1 more left in the entire country, its in California, -----thanks to all the guys who tried to help-Al -------- added 2 Minutes and 31 Seconds later -------- Sorry for the error in the post -Al Last edited by riverhead55; 02-16-2010 at 06:30 PM.. Reason: Automerged Doublepost

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
So you think you can play the drums?	hotwheels	Other Video's	4	05-22-2010 12:08 PM
96 Brake Diagram	Intmdtr	BS Room	2	10-12-2009 08:18 PM
3 rd brake light	Joe02GTBlu	4.6 Mustang	7	09-03-2009 08:04 AM
rear 5 lug disk brake conversion	NoMo5o	5.0 Mustang	7	04-17-2008 11:54 PM
Cobra rear brake install and axle issues	Erich	4.6 Mustang	3	12-04-2006 02:33 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)