Program Keyless Entry Remote's

[HooniganRacing]

I came across this info when I was trying to figureout how to program one of my old fob's to my car. For 94-98 GT's:
1. Open trunk and remove the trim on the driver's side until you see a box that say's anti-theft on it..
2. Turn the ignition to the ON/ACC position.
3. Find the plug with 2 terminal's and nothing going to it. It's the only plug there with nothing connected to it.
4. Using a jumped wire connect those 2 terminal's....you'll hear the doorlock's either lock or unlock....that mean's it's ready to be programmed.
5. Press unlock or lock on the remote a few time's until your door lock's start to work.
6. Bam you got keyless entry.
For 99-Present Mustang's:
1. Sit in your car.
2. Put the key in the ignition.
3. Turn the key back and forth from the "om" position 8-10 time's in a row.
4. The car's lock's will lock and unlock. When they do, press the button's on the remote. The remote will automatically start working if it program's correctly.
You can program up to like 8 differant remote's.

You guy's mite already know this but I just figured I would make a post about it just incase.

[92NOTCH]

Thats all you have to do and the dealers charge an arm and a leg. Thanks do you also know if this works for other FORD vehicles.... I work at a car lot and we get quite a few come in that dont work.

[hotwheels]

that's great information there.......

[HooniganRacing]

I'm pretty ure if it works for Stang's it would more than likely work for other Ford vehicle's as well. I'm pretty sure that all ford vehicle's share the same stock type alarm system. However I'm not 100% sure and I don't wanna misguide anyone so I will try my best and do some research on that for yea Joey.

[Yellow94GT]

Do I hear STICKY.

Thats very helpful info.