tweecer or not to tweecer

farny21 · 12-02-2009

do any of you guys run stock computers with any luck, throwing in the 331 and dont know if the A9L is going to like the cam and 104 octane. thinking of getting a tweecer.

BB90GT · 12-03-2009

I have the tweecer r/t on my 393w with a kennebell blowzilla, and I will say this if you have a lot of time on your hands it is a great tool. If I had it all to do over again I would just go with a chip they are cheaper and easier to work with. I spent 1400 on the dyno getting mine right. The tune was very close when I started but I made some mistakes changing the wrong table and it cost me alot. Again I suggest getting an sct switch chip and having a tune put on the car that way besides you can still run the factory computer with the chip. Just my opinion the tweecer is a pain in the ass.

Beernut · 12-03-2009

I have looked into ALL systems.. tweecer is about the hardist to work with and there is not much help from tweecer. there are forums but it takes a LOT of time!!

quarterhourse is cheap,(250-300) easier to work with and has more help available but you still have to learn how/what your doing. its a chip you tune with software and can re-burn the chip.

AEM has some NICE features but at $1800 its NOT cheap !!!

PMS is suppose to be the easiest to work with but its about $as much as AEM when you buy new and get all the add ons and software

with ANY system you will HAVE to use a wideband !! that another $250.

or spend about $400-600 and have a "expert" tune it with their wideband. you never have to learn anything, you dont have the "down time" and you dont run the risk of really messin something up.

farny21 · 12-03-2009

I looked around my local craigslist and there is a guy selling sct chips at his shop so i think i will just get that and my brother said he is getting there software, thanks for the info.

BB90GT · 12-03-2009

Damn that sct software would be nice, but I dont have the 10 grand to buy it. That is what the guy who burnt my chip said he paid when we bought there software and rights to use it. BUt hey if you can get it than that is the way to go. Good luck I hope all goes well for ya.

Red89coupe you are 100% correct with the money spent and the amount of time waisted trying other stuff. But the good widebands are more expensive than 250 I paid 425 for mine but its pretty.

Beernut · 12-03-2009

you can buy the SCT software/chip combo for WAY less !!! $1000 or less. the pro racer package gets ya the chip, a chip burner, the software, and access to the SCT forums. by far the best option IMHO.

http://www.lasotaracing.com/MOPRP.html

yeah really good widebands are more expensive but well worth it for sure.

farny21 · 12-03-2009

Ive decided to go with tweecer rt but heres the link from SCT its only 350 bucks.

http://www.sctflash.com/PRPFord.php

farny21 · 12-03-2009

I was going to go with the sct but the local guy didnt know if he could
by-pass the egr code.

jpmcclos · 12-03-2009

Quote:

Originally Posted by farny21

I was going to go with the sct but the local guy didnt know if he could
by-pass the egr code.

I used this to bypass the code.

http://rjminjectiontech.com/?p=9

jsam · 12-03-2009

i'd go with the sct myself. isn't bob kurgan in your neck of the woods? he can tune anything

12-02-2009	#1 (permalink)
farny21 Insane Join Date: Oct 2008 Location: big rapids, michigan Posts: 44 iTrader: (0) Friends: (2) Last Online: 10-26-2010 11:23 PM Time Spent Online: 11 Hours 46 Minutes 21 Seconds My Album's: farny21's album Thanks: 0 Thanked 0 Times in 0 Posts	tweecer or not to tweecer do any of you guys run stock computers with any luck, throwing in the 331 and dont know if the A9L is going to like the cam and 104 octane. thinking of getting a tweecer. __________________ 88 5.0 hatchback, gt-40p exploder motor, 24lb injectors, 70mm throttle body, 76mm mass air, 3.73 gears, eaton posi, moser 31 spline axles, scat 331 in the making!!

12-03-2009	#2 (permalink)
BB90GT Junior Member Join Date: Aug 2006 Posts: 902 iTrader: (3) Friends: (5) Last Online: 5 Hours Ago 03:29 PM Time Spent Online: 4 Days 1 Hour 27 Minutes 47 Seconds My Album's: BB90GT's album My Garage: BB90GT's Garage Thanks: 0 Thanked 3 Times in 3 Posts	Re: tweecer or not to tweecer I have the tweecer r/t on my 393w with a kennebell blowzilla, and I will say this if you have a lot of time on your hands it is a great tool. If I had it all to do over again I would just go with a chip they are cheaper and easier to work with. I spent 1400 on the dyno getting mine right. The tune was very close when I started but I made some mistakes changing the wrong table and it cost me alot. Again I suggest getting an sct switch chip and having a tune put on the car that way besides you can still run the factory computer with the chip. Just my opinion the tweecer is a pain in the ass. __________________ LSU TIGERS

12-03-2009	#3 (permalink)
Beernut A.K.A red89coupe Real Name: Jayson Join Date: Aug 2006 Location: back in the big O Posts: 2,251 iTrader: (3) Friends: (8) Willy Wonka Chocolate Factory Take Over Champion! Mario Bros Pipe Panic Champion! Assault Paintball Champion! Last Online: 4 Weeks Ago 11:22 PM Time Spent Online: 1 Week 2 Days 2 Hours 50 Minutes 56 Seconds My Album's: Beernut's album Thanks: 0 Thanked 2 Times in 2 Posts	Re: tweecer or not to tweecer I have looked into ALL systems.. tweecer is about the hardist to work with and there is not much help from tweecer. there are forums but it takes a LOT of time!! quarterhourse is cheap,(250-300) easier to work with and has more help available but you still have to learn how/what your doing. its a chip you tune with software and can re-burn the chip. AEM has some NICE features but at $1800 its NOT cheap !!! PMS is suppose to be the easiest to work with but its about $as much as AEM when you buy new and get all the add ons and software with ANY system you will HAVE to use a wideband !! that another $250. or spend about $400-600 and have a "expert" tune it with their wideband. you never have to learn anything, you dont have the "down time" and you dont run the risk of really messin something up. __________________ www.krisstarnesracing.com ..... one day it will be back up lol

12-03-2009	#4 (permalink)
farny21 Insane Join Date: Oct 2008 Location: big rapids, michigan Posts: 44 iTrader: (0) Friends: (2) Last Online: 10-26-2010 11:23 PM Time Spent Online: 11 Hours 46 Minutes 21 Seconds My Album's: farny21's album Thanks: 0 Thanked 0 Times in 0 Posts	Re: tweecer or not to tweecer I looked around my local craigslist and there is a guy selling sct chips at his shop so i think i will just get that and my brother said he is getting there software, thanks for the info.

12-03-2009	#5 (permalink)
BB90GT Junior Member Join Date: Aug 2006 Posts: 902 iTrader: (3) Friends: (5) Last Online: 5 Hours Ago 03:29 PM Time Spent Online: 4 Days 1 Hour 27 Minutes 47 Seconds My Album's: BB90GT's album My Garage: BB90GT's Garage Thanks: 0 Thanked 3 Times in 3 Posts	Re: tweecer or not to tweecer Damn that sct software would be nice, but I dont have the 10 grand to buy it. That is what the guy who burnt my chip said he paid when we bought there software and rights to use it. BUt hey if you can get it than that is the way to go. Good luck I hope all goes well for ya. Red89coupe you are 100% correct with the money spent and the amount of time waisted trying other stuff. But the good widebands are more expensive than 250 I paid 425 for mine but its pretty.

12-03-2009	#6 (permalink)
Beernut A.K.A red89coupe Real Name: Jayson Join Date: Aug 2006 Location: back in the big O Posts: 2,251 iTrader: (3) Friends: (8) Willy Wonka Chocolate Factory Take Over Champion! Mario Bros Pipe Panic Champion! Assault Paintball Champion! Last Online: 4 Weeks Ago 11:22 PM Time Spent Online: 1 Week 2 Days 2 Hours 50 Minutes 56 Seconds My Album's: Beernut's album Thanks: 0 Thanked 2 Times in 2 Posts	Re: tweecer or not to tweecer you can buy the SCT software/chip combo for WAY less !!! $1000 or less. the pro racer package gets ya the chip, a chip burner, the software, and access to the SCT forums. by far the best option IMHO. http://www.lasotaracing.com/MOPRP.html yeah really good widebands are more expensive but well worth it for sure.

12-03-2009	#7 (permalink)
farny21 Insane Join Date: Oct 2008 Location: big rapids, michigan Posts: 44 iTrader: (0) Friends: (2) Last Online: 10-26-2010 11:23 PM Time Spent Online: 11 Hours 46 Minutes 21 Seconds My Album's: farny21's album Thanks: 0 Thanked 0 Times in 0 Posts	Re: tweecer or not to tweecer Ive decided to go with tweecer rt but heres the link from SCT its only 350 bucks. http://www.sctflash.com/PRPFord.php

12-03-2009	#8 (permalink)
farny21 Insane Join Date: Oct 2008 Location: big rapids, michigan Posts: 44 iTrader: (0) Friends: (2) Last Online: 10-26-2010 11:23 PM Time Spent Online: 11 Hours 46 Minutes 21 Seconds My Album's: farny21's album Thanks: 0 Thanked 0 Times in 0 Posts	Re: tweecer or not to tweecer I was going to go with the sct but the local guy didnt know if he could by-pass the egr code.

12-03-2009	#10 (permalink)
jsam 2v hater Real Name: jonathan Join Date: Jan 2007 Location: frankiln ky Posts: 1,036 iTrader: (0) Friends: (3) Last Online: 6 Days Ago 08:29 PM Time Spent Online: 3 Days 44 Minutes 15 Seconds My Album's: jsam's album My Garage: jsam's Garage Thanks: 1 Thanked 1 Time in 1 Post	Re: tweecer or not to tweecer i'd go with the sct myself. isn't bob kurgan in your neck of the woods? he can tune anything __________________ 85 gt 347 stroker. pa aod. it's a f'n money pit 79 cobra 302 4 spd 36k original miles 68 coupe, 93 calypso hatch www.bowlinggreenmustangs.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Has anyone ever used the TWEECER	quickerstang	BS Room	7	01-13-2009 12:14 AM
The tweecer	BB90GT	5.0 Mustang	11	12-15-2007 08:06 PM
Tweecer	Gtconv91	5.0 Mustang	7	06-11-2007 07:36 PM
TwEECer	$hawn	Electronics Talk	18	09-11-2006 07:35 PM