Rpm shift?

mustangfury86 · 06-12-2007

what RPM range dose everyone shift at I am going 2 the track friday and i need 2 run beter than the last time .
I ran an 15.85 1/4 but that was with a blown head gasket.
got all that fixed and some more any suggestions would be nice thanks 2 all

$hawn · 06-12-2007

if it's pretty stock, 5k

hotwheels · 06-13-2007

My tach light is set up at 5500rpm.........

already7 · 06-13-2007

Take it out on a back road and wind it up good and watch where your motor stops pulling strong and then shift just before that. That is the only way you will really know what your motor will do. Over revving the motor will not gain you anything but a slower time. But you also need the most out of it too! You will just have to do it trial and error. You will feel when the motor stops pulling strong and then you will be able to pick the right shift point. Later, Allen...

Gtconv91 · 06-13-2007

id suggest right around 5250.. thats where the torque and HP figures cross on almost every factory 5.0

mustangfury86 · 06-13-2007

thank u all any more sugguestions would be nice

06-12-2007	#1 (permalink)
mustangfury86 Junior Member Real Name: Justin Join Date: Mar 2007 Location: shreveport , la Posts: 493 iTrader: (0) Friends: (2) Last Online: 07-27-2011 11:09 AM Time Spent Online: 1 Day 1 Hour 9 Minutes 17 Seconds My Album's: mustangfury86's album My Garage: mustangfury86's Garage Thanks: 0 Thanked 2 Times in 2 Posts	Rpm shift? what RPM range dose everyone shift at I am going 2 the track friday and i need 2 run beter than the last time . I ran an 15.85 1/4 but that was with a blown head gasket. got all that fixed and some more any suggestions would be nice thanks 2 all

06-12-2007	#2 (permalink)
$hawn nem·e·sis Join Date: Aug 2006 Location: Florida Posts: 149 iTrader: (0) Friends: (1) Last Online: 08-11-2011 09:37 PM Time Spent Online: 5 Minutes 22 Seconds My Album's: $hawn's album My Garage: $hawn's Garage Thanks: 0 Thanked 0 Times in 0 Posts	if it's pretty stock, 5k __________________ 10.48 @ 131

06-13-2007	#3 (permalink)
hotwheels Car Enthusiast Real Name: Doug Join Date: Aug 2006 Location: Cheyenne, Wyoming Posts: 21,165 MySpace ID: insanemustangs_com Facebook ID: Insanemustang Mustangs Twitter ID: insanemustangs iTrader: (0) Friends: (416) Last Online: 1 Day Ago 07:58 AM Time Spent Online: 3 Weeks 6 Days 6 Hours 31 Minutes 32 Seconds My Album's: hotwheels's album My Garage: hotwheels's Garage Thanks: 3 Thanked 40 Times in 39 Posts	My tach light is set up at 5500rpm......... __________________ Webmaster in training and owner of a mini Jay Leno Poorman's car collection

06-13-2007	#5 (permalink)
Gtconv91 I need a Beer Join Date: Aug 2006 Location: Cheyenne, Wy Posts: 2,644 iTrader: (2) Friends: (4) Last Online: 1 Day Ago 03:23 PM Time Spent Online: 1 Day 23 Hours 58 Minutes 30 Seconds My Album's: Gtconv91's album My Garage: Gtconv91's Garage Thanks: 0 Thanked 1 Time in 1 Post	id suggest right around 5250.. thats where the torque and HP figures cross on almost every factory 5.0 __________________ slow.......... 12.30 @ 110 91 Gt conv

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-13-2007	#4 (permalink)
already7 Super Moderator Real Name: Allen Join Date: Mar 2007 Location: North Little Rock, AR. Posts: 8,977 Facebook ID: Allen Weatherford iTrader: (2) Friends: (53) Breakout Champion! Moon Lander Champion! Danger Wheels Champion! Last Online: 1 Day Ago 09:27 PM Time Spent Online: 2 Weeks 1 Day 19 Hours 11 Minutes 59 Seconds My Album's: already7's album My Garage: already7's Garage Thanks: 36 Thanked 13 Times in 13 Posts	Take it out on a back road and wind it up good and watch where your motor stops pulling strong and then shift just before that. That is the only way you will really know what your motor will do. Over revving the motor will not gain you anything but a slower time. But you also need the most out of it too! You will just have to do it trial and error. You will feel when the motor stops pulling strong and then you will be able to pick the right shift point. Later, Allen...

06-13-2007	#6 (permalink)
mustangfury86 Junior Member Real Name: Justin Join Date: Mar 2007 Location: shreveport , la Posts: 493 iTrader: (0) Friends: (2) Last Online: 07-27-2011 11:09 AM Time Spent Online: 1 Day 1 Hour 9 Minutes 17 Seconds My Album's: mustangfury86's album My Garage: mustangfury86's Garage Thanks: 0 Thanked 2 Times in 2 Posts	thank u all any more sugguestions would be nice

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AOD Shift and rebuild kit	92NOTCH	Mustang Classifieds	1	04-19-2010 08:38 PM
Shift Kit Explained	johnisbubba	Articles/Archives	0	02-21-2008 09:49 AM
when should i shift	svtsilversnake	4.6L V8 Specific	22	11-23-2007 01:08 AM
shift rpm	silvergt	4.6 Mustang	5	06-19-2007 07:07 PM
Has anyone used an AOD shift kit	MustangCowboy	BS Room	3	03-07-2007 07:11 AM