351W Crankshaft

chile131 · 09-06-2008

Ok after my harmonic balancer fell off I have decided to slowly build my motor with advise for everyone n this website. I wanted to know if a 351 Windsor crankshaft, pistons and piston rods would fit in a 302? Also what other changes would I have to make?? I found a 351 W in a local junk yard that still has all the internal components. If this would work than woooooohuuuuu if not than F!@# this shit, here comes the parts for a 347.

Intmdtr · 09-07-2008

why not get the 351 and build it? BIGGER IS BETTER

chile131 · 09-07-2008

would the 351W crankshaft work??

Intmdtr · 09-07-2008

No the windsor crank won't fit. the counterweights on a windsor crank will hit the 302 block. i have heard of people milling these down to fit but they pay a fortune. cheaper to buy a stroker crank then to go through all the hassle. I would say stick with a stroker kit. you can pick them up for less then 2k.

chile131 · 09-09-2008

Right on I sure do appreciate it. I have to put a new harmonic balancer on my car. Can anyone tell me how to put one on and still have my timing dead on??

$hawn · 09-09-2008

Quote:

Originally Posted by chile131

Right on I sure do appreciate it. I have to put a new harmonic balancer on my car. Can anyone tell me how to put one on and still have my timing dead on??

replacing the balancer will not affect your ignition timing.

09-06-2008	#1 (permalink)
chile131 Junior Member Join Date: Sep 2007 Location: Tacoma Posts: 16 MySpace ID: NoNE iTrader: (0) Friends: (1) Last Online: 04-24-2010 09:11 AM Time Spent Online: 50 Minutes 36 Seconds My Album's: chile131's album Thanks: 0 Thanked 0 Times in 0 Posts	351W Crankshaft Ok after my harmonic balancer fell off I have decided to slowly build my motor with advise for everyone n this website. I wanted to know if a 351 Windsor crankshaft, pistons and piston rods would fit in a 302? Also what other changes would I have to make?? I found a 351 W in a local junk yard that still has all the internal components. If this would work than woooooohuuuuu if not than F!@# this shit, here comes the parts for a 347.

09-07-2008	#2 (permalink)
Intmdtr Leader of Men Real Name: Brian Join Date: May 2007 Location: Wasaga Beach, Ontario Posts: 9,312 iTrader: (1) Friends: (34) Last Online: 9 Hours Ago 04:59 PM Time Spent Online: 2 Weeks 5 Days 21 Minutes 54 Seconds My Album's: Intmdtr's album My Garage: Intmdtr's Garage Thanks: 1 Thanked 29 Times in 28 Posts	why not get the 351 and build it? BIGGER IS BETTER __________________ HELLO My Name is BRIAN "Without Warning, Without Conscience" *"Live life to the fullest, it's not a dress rehearsal"*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
351C vs. 351W	roush17	Classic Mustangs	10	03-10-2010 09:35 AM
351W vs 5.0	TruStang3	Engine Talk	47	03-28-2009 03:59 AM
351w kits?	88 clone	5.0 Mustang	0	05-27-2008 08:07 PM
351w?	joekool3321	BS Room	7	04-24-2008 06:41 PM
Ford Racing Crankshaft ?	uedlose	5.0 Mustang	0	09-17-2006 08:38 PM

09-07-2008	#3 (permalink)
chile131 Junior Member Join Date: Sep 2007 Location: Tacoma Posts: 16 MySpace ID: NoNE iTrader: (0) Friends: (1) Last Online: 04-24-2010 09:11 AM Time Spent Online: 50 Minutes 36 Seconds My Album's: chile131's album Thanks: 0 Thanked 0 Times in 0 Posts	would the 351W crankshaft work??

09-07-2008	#4 (permalink)
Intmdtr Leader of Men Real Name: Brian Join Date: May 2007 Location: Wasaga Beach, Ontario Posts: 9,312 iTrader: (1) Friends: (34) Last Online: 9 Hours Ago 04:59 PM Time Spent Online: 2 Weeks 5 Days 21 Minutes 54 Seconds My Album's: Intmdtr's album My Garage: Intmdtr's Garage Thanks: 1 Thanked 29 Times in 28 Posts	No the windsor crank won't fit. the counterweights on a windsor crank will hit the 302 block. i have heard of people milling these down to fit but they pay a fortune. cheaper to buy a stroker crank then to go through all the hassle. I would say stick with a stroker kit. you can pick them up for less then 2k.

09-09-2008	#5 (permalink)
chile131 Junior Member Join Date: Sep 2007 Location: Tacoma Posts: 16 MySpace ID: NoNE iTrader: (0) Friends: (1) Last Online: 04-24-2010 09:11 AM Time Spent Online: 50 Minutes 36 Seconds My Album's: chile131's album Thanks: 0 Thanked 0 Times in 0 Posts	Right on I sure do appreciate it. I have to put a new harmonic balancer on my car. Can anyone tell me how to put one on and still have my timing dead on??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)